PriceList for Membrane Pressure - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo

Short Description:

Product Detail

Product Tags

Feedback (2)

The pretty loaded projects management experiences and one to a person support model make the high importance of business enterprise communication and our easy understanding of your expectations for Wastewater Bioreactor , Ultrafiltration Nanofiltration , Purification System , We promise to try our great to deliver you with high quality and economical products and services.

PriceList for Membrane Pressure - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo Detail:

Product Overview

UFc160AL capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVC material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 100K Dalton, membrane ID/OD is 1.0mm/1.8mm, filtering type is inside-out.

Applications

Production of mineral water, spring water, or other sterile liquid.
Drinking treatment of tap water, surface water, well water and river water.
Pretreatment of RO.
Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service conditions of different water sources:

Ingredient	Effect
SS, Particles > 1μm	Removal Rate ≥ 99%
SDI	≤ 3
Bacteria, Viruses	> 4 log
Turbidity	<0. 1NTU
TOC	Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 15NTU. This product is qualified for drinking water related products

Product Parameters

product-description14

Technical Parameters:

Filtering Type	Inside-out
Membrane Material	Modified PVC
MWCO	100K Dalton
Membrane Area	16m2
Membrane ID/OD	1.0mm/1.8mm
Dimensions	Φ160mm*1415mm
Connector Size	DN32

Application Data:

Pure Water Flux	4,700L/H (0.15MPa, 25C)
Designed Flux	35-100L/m2.hr (0.15MPa, 25C)
Suggested Working Pressure	≤ 0.2MPa
Maximum Transmembrane Pressure	0.2MPa
Maximum Working Temperature	45C
PH Range	Working: 4-10; Washing: 2-12
Operating Mode	Cross-flow or Dead-end

Feeding Water Requirements:
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused by large particles in raw water.

Turbidity	≤ 15NTU
Oil & Grease	≤ 2mg/L
SS	≤ 20mg/L
Total Iron	≤ 1mg/L
Continuous Residual Chlorine	≤ 5ppm
COD	Suggested ≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters:

Maximum Backwashing Pressure	0.2MPa
Backwashing Flow Rate	100-150L/m2.hr
Backwashing Frequency	Every 30-60min.
Backwashing Duration	30-60s
CEB Frequency	0-4 times per day
CEB Duration	5-10min.
CIP Frequency	Every 1-3 months
Washing Chemicals:
Sterilization	15ppm Sodium Hypochlorite
Organic Pollution Washing	0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic Pollution Washing	1-2% Citric Acid/0.2% Hydrochloric Acid

Component Material:

Component	Material
Membrane	Modified PVC
Sealing	Epoxy Resins
Housing	UPVC

Product detail pictures:

Related Product Guide:

We're going to commit ourselves to giving our esteemed customers along with enthusiastically considerate providers for PriceList for Membrane Pressure - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo , The product will supply to all over the world, such as: Estonia, New Zealand, Grenada, In the increasingly competitive market, With sincere service high quality products and well-deserved reputation, we always offer customers support on products and techniques to achieve long-term cooperation. Living by quality, development by credit is our eternal pursuit, We firmly believe that after your visit we will become long-term partners.

Hollow Fiber Membrane Water Filter