Leading Manufacturer for Microfiltration In Water Treatment - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200AM Drinking Water Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our products and solutions are greatly recognized and trustworthy by customers and may fulfill constantly changing financial and social requires for Drinking Filter , Ultrafiltration Water , Mbr Wastewater Treatment Process , To benefit from our strong OEM/ODM capabilities and considerate services, please contact us today. We will sincerely create and share success with all clients.
Leading Manufacturer for Microfiltration In Water Treatment - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200AM Drinking Water Treatment – Bangmo Detail:

Product Overview

UFc200AM capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVC material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 100K Dalton, membrane ID/OD is 1.0mm/1.8mm, filtering type is inside-out.

Applications

  • Production of mineral water, mountain spring water and other sterile liquid.
  • Drinking treatment of tap water, surface water, well water, river water, etc.
  • Pretreatment of RO.
  • Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service conditions of different water sources:

Ingredient Effect
SS, Particles > 1μm Removal Rate ≥ 99%
SDI ≤ 3
Bacteria, Viruses > 4 log
Turbidity < 0.1NTU
TOC Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 15NTU.

Product Parameters

product-description15

Technical Parameters:

Filtering Type Inside-out
Membrane Material Modified PVC
MWCO 100K Dalton
Membrane Area 27m2
Membrane ID/OD 1.0mm/1.8mm
Dimensions Φ200mm*1480mm
Connector Size DN40 Union

Application Data:

Pure Water Flux 7,000L/H (0.15MPa, 25C)
Designed Flux 35-100L/m2.hr (0.15MPa, 25C)
Suggested Working Pressure ≤ 0.2MPa
Maximum Transmembrane Pressure 0.2MPa
Maximum Working Temperature 45C
PH Range Working: 4-10; Washing: 2-12
Operating Mode Cross-flow or Dead-end

Feeding Water Requirements:
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused by large particles in raw water.

Turbidity ≤ 15NTU
Oil & Grease ≤ 2mg/L
SS ≤ 20mg/L
Total Iron ≤ 1mg/L
Continuous Residual Chlorine ≤ 5ppm
COD Suggested ≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters:

Maximum Backwashing Pressure 0.2MPa
Backwashing Flow Rate 100-150L/m2.hr
Backwashing Frequency Every 30-60min.
Backwashing Duration 30-60s
CEB Frequency 0-4 times per day
CEB Duration 5-10min.
CIP Frequency Every 1-3 months
Washing Chemicals:
Sterilization 15ppm Sodium Hypochlorite
Organic Pollution Washing 0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic Pollution Washing 1-2% Citric Acid/0.2% Hydrochloric Acid

Component Material:

Component Material
Membrane Modified PVC
Sealing Epoxy Resins
Housing UPVC

Product detail pictures:

Leading Manufacturer for Microfiltration In Water Treatment - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200AM Drinking Water Treatment – Bangmo detail pictures

Leading Manufacturer for Microfiltration In Water Treatment - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200AM Drinking Water Treatment – Bangmo detail pictures


Related Product Guide:

we can easily offer you high-quality products and solutions, competitive rate and very shopper support. Our destination is You come here with difficulty and we give you a smile to take away for Leading Manufacturer for Microfiltration In Water Treatment - UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200AM Drinking Water Treatment – Bangmo , The product will supply to all over the world, such as: Guatemala, Tunisia, America, We adhere to client 1st, high quality 1st, continuous improvement, mutual advantage and win-win principles. When cooperation together with the customer, we provide shoppers with the high high-quality of service. Established good business relations using the Zimbabwe buyer inside the business, we've got established own brand and reputation. At the identical time, wholeheartedly welcome new and old prospects to our company to go to and negotiate small business.
  • Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
    5 StarsBy Grace from Saudi Arabia - 2018.07.12 12:19
    This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
    5 StarsBy Lorraine from Czech republic - 2018.12.28 15:18
    Write your message here and send it to us
    Baidu
    sogou