Factory wholesale Mbr Wastewater Treatment Process - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo

    Short Description:


    Product Detail

    Product Tags

    Related Video

    Feedback (2)

    During the past few years, our business absorbed and digested state-of-the-art technologies the two at home and abroad. Meanwhile, our firm staffs a group of experts devoted to your development of Uf Filtration System , Cross Flow Membrane , Ultrafiltration Water Filter , We have now four leading solutions. Our products are effective sold not only during the Chinese market, but also welcomed during the international industry.
    Factory wholesale Mbr Wastewater Treatment Process - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo Detail:

    Product Overview

    UFf225 capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVDF material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 200K Dalton, membrane ID/OD is 0.8mm/1.3mm, filtering type is outside-in.

    Applications

    • Drinking water treatment of tap water, surface water, well water and river water.
    • Pretreatment of RO.
    • Treatment, recycle and reuse of industrial waste water.

    Filtration Performance

    This product is proven to have below filtering effects according to the service conditions of different water sources:

    Ingredient Effect
    SS, Particles > 1μm Removal Rate ≥ 99%
    SDI ≤ 3
    Bacteria, Viruses > 4 log
    Turbidity < 1NTU
    TOC Removal Rate: 0-25%

    *Above data is obtained under the condition that feeding water turbidity is < 25NTU.

    Product Parameters

    product-description112

    Technical Parameters:

    Filtering Type Outside-in
    Membrane Material Modified PVDF
    MWCO 200K Dalton
    Membrane Area 60m2
    Membrane ID/OD 0.8mm/1.3mm
    Dimensions Φ225mm*1860mm
    Connector Size DN50

    Application Data:

    Pure Water Flux 12,000L/H (0.15MPa, 25C)
    Designed Flux 40-120L/m2.hr (0.15MPa, 25C)
    Suggested Working Pressure ≤ 0.2MPa
    Maximum Transmembrane Pressure 0.15MPa
    Maximum Backwashing Pressure 0.15MPa
    Air Washing Volume 0.1-0.15N m3/m2 .hr
    Air Washing Pressure ≤ 0.1MPa
    Maximum Working Temperature 45C
    PH Range Working: 4-10; Washing: 2-12
    Operating Mode Cross-flow or Dead-end

    Feeding Water Requirements:
    Before feeding water, a security filter < 50 μm should be set to prevent blockage caused by large particles in raw water.

    Turbidity ≤ 25NTU
    Oil & Grease ≤ 2mg/L
    SS ≤ 20mg/L
    Total Iron ≤ 1mg/L
    Continuous Residual Chlorine ≤ 5ppm
    COD Suggested ≤ 500mg/L

    *Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

    Operating Parameters:

    Backwashing Flow Rate 100-150L/m2.hr
    Backwashing Frequency Every 30-60min.
    Backwashing Duration 30-60s
    CEB Frequency 0-4 times per day
    CEB Duration 5-10min.
    CIP Frequency Every 1-3 months
    Washing Chemicals:
    Sterilization 15ppm Sodium Hypochlorite
    Organic Pollution Washing 0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide
    Inorganic Pollution Washing 1-2% Citric Acid/0.2% Hydrochloric Acid

    Component Material:

    Component Material
    Membrane Modified PVDF
    Sealing Epoxy Resins
    Housing UPVC

    Product detail pictures:


    Related Product Guide:

    Our products are broadly identified and trustworthy by people and may meet continually modifying financial and social requires of Factory wholesale Mbr Wastewater Treatment Process - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: Denmark, United States, Sydney, We have constructed strong and long co-operation relationship with an enormous quantity of companies within this business in Kenya and overseas. Immediate and specialist after-sale service supplied by our consultant group has happy our buyers. Detailed Info and parameters from the merchandise will probably be sent to you for any thorough acknowledge. Free samples may be delivered and company check out to our corporation. n Kenya for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.
    As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
    5 StarsBy Cora from Adelaide - 2018.02.21 12:14
    The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
    5 StarsBy Nana from Miami - 2017.12.19 11:10
    Write your message here and send it to us
    Baidu
    sogou