factory Outlets for Ultrafiltration Filter - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo
factory Outlets for Ultrafiltration Filter - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo Detail:
Product Overview
MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.
Applications
●Treatment, recycle and reuse of industrial waste water.
●Treatment of refuse leachate.
●Upgrade and reuse of municipal sewage.
Filtration Performance
| No. | Item | Water Output Index |
| 1 | TSS | ≤1mg/L |
| 2 | Turbidity | ≤ 1 |
Specifications
Size
Technical Parameters
| Structure | Outside-in |
| Membrane Material | Reinforced Modified PVDF |
| Precision | 0.1 micron |
| Membrane Area | 25m2 |
| Membrane ID/OD | 1.0mm/ 2.2mm |
| Size | 785mm×2000mm×40mm |
| Joint Size | DN32 |
Component Material
| Component | Material |
| Hollow Fiber Membrane | Reinforced Modified PVDF |
| Sealing Compound | Epoxy Resins + Polyurethane (PU) |
| Housing | ABS |
Application Parameters
| Designed Flux | 10~25L/m2.h |
| Backwashing Flux | 30~60L/m2.h |
| Operating Temperature | 5~45°C |
| Maximum Operating Pressure | -50KPa |
| Suggested Operating Pressure | 0~-35KPa |
| Maximum backwashingPressure | 100KPa |
| Operating Mode | 9min Operation+1min Break/8min Operaetion+2min Break |
| Blowing Mode | Continuous Aeration |
| Aeration Rate | 4m3/h.pc |
| Washing Period | Clean water backwashing every 2~4h; CEB every 2~4 weeks; CIP every 6~12 months |
Using Conditions
There should be appropriate pretreatments before UF. If defoamer has to be used, please choose alcohol defoamer, silicone defoamer is forbidden.
| Item | Value |
| PH Range | 5~9 (washing: 2~12) |
| Particle Size | <2mm, no sharp particles |
| Oil & Grease | ≤2mg/L |
| Hardness | ≤150mg/L |
Product detail pictures:
Related Product Guide:
To be a result of ours specialty and service consciousness, our enterprise has won an excellent status between buyers all around the globe for factory Outlets for Ultrafiltration Filter - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: Johannesburg, Seattle, Houston, The quality of our merchandise is equal to OEM's quality, because our core parts are the same with OEM supplier. The above items have passed professional certification, and we not only can produce OEM-standard items but we also accept Customized Merchandise order.
By Antonio from Hyderabad - 2017.04.18 16:45
Customer service staff and sales man are very patience and they all good at English, product's arrival is also very timely, a good supplier.
By Molly from Spain - 2017.01.28 19:59
Products categories
-
Factory Supply Stainless Steel Water Filter - ...
-
Well-designed Ultrafiltration Design Calculatio...
-
Chinese wholesale Water Purifier Plant Machine ...
-
100% Original Factory Mbr Sewage Treatment Plan...
-
Renewable Design for Mbr Wastewater Treatment P...
-
Hot-selling Uf Membrane - UF Membrane Module 8...